Sherwood R-963 Manual de usuario

OPERATINGINSTRUCTIONSCHANNELSELECTORTONE MODEA/BPHONESSPEAKERTUNING/PRESETTEST TONE VIDEO LABELROOM2 FEEDAUDIO/VIDEO SURROUND RECEIVER R-963MULTI CONT

ENGLISH10Front Panel ControlsS-VIDEO OUTOPTICAL OUTAUDIO OUTVIDEO OUTAdditional video componentCHANNELSELECTORTONE MODEA/BPHONESSPEAKERTUNING/PRESETTE

ENGLISHUniversal Remote Controls11• This section explains the basic functions for Sherwood or OSD mode. For the non-Sherwood mode, refer to theoperati

ENGLISH12󳂮FUNCTION TABLE of the NUMBERED BUTTONS.󳂮Notes:• Some functions for CD player, tape deck, DVD player, etc. may not be available.• For details

13LOADING BATTERIESOPERATING COMPONENTS WITH REMOTE CONTROL12• When operating a Sherwood CD player or tape deckusing the system remote control, aim th

14ENTERING A SETUP CODE• This remote control can control up to ten different components.• Before operating audio and video components using the remote

15󳀏The code is saved and the Pre-PROgramming modeis resumed.󳀏When you do not want to save the code, select theEXIT on the LCD screen or press the MAIN

16ADDITIONAL INFORMATION ON REMOTE COMMAND CODES• This receiver recognizes and responds to IR codes that are not transmitted by the supplied remote co

17ROOM 2 Remote ControlsThis remote control unit is an additional remote control unit for the ROOM 2 source playback only.• Operation of ROOM 2 functi

ENGLISH18LISTENING TO A PROGRAM SOURCEOperationsBefore operationSelect the desired input source.3• Enter the standby mode.• The STANDBY button lights

ENGLISH19Operate the selected component forplayback.5Select the tone mode as desired.7Select the digital or the analog input asdesired.4 At the tone d

2IntroductionCongratulations on Your Purchase!Your new high fidelity receiver is designed to delivermaximum enjoyment and years of trouble free servic

ENGLISH20To mute the sound.11󳀏When 96 kHz PCM(2 channel stereo) signals areinput or the source direct function is selected, thecinema EQ function can

ENGLISH DTS Digital Surround DTS Digital Surround(also called simply DTS) is a multi-channel digital signalformat which can handle higher data rates

ENGLISH22󳀏The following modes apply conventional 2-channel signals such as digital PCM or analog stereo signals to highperformance Digital Signal Proc

ENGLISH23Ideal speaker placement varies depending on the size of your room andthe wall coverings, etc. The typical example of speaker placement andre

ENGLISH24ENJOYING SURROUND SOUND󳀏Surround sound effect will not work properly if the signal passes through a graphic equalizer.Please refer to your eq

ENGLISH25Continued󳂮 When playing some multi-channel program sources in the Extra Surround 6.1/7.1 mode.󳀏When the digital signals from the following pr

ENGLISHAdjusting each channel levelSelect the desired channel.3Adjust the level of the selected channelas desired.4Repeat the above steps ③ and ④ toad

27Downmixing into 2 front channels󳀏To cancel the 2 - CH downmix mode, select thedesired surround mode with using the MULTICONTROL knob or the DSP MODE

ENGLISH28LISTENING TO RADIO BROADCASTSAuto tuning󳀏Each time this button is pressed, the mode changesas follows:󳂵 Tuning mode : “PRESET” goes off.Prese

ENGLISH29Repeat the above steps ① to ③ tomemorize other stations.4After selecting the tuner as input source,select the preset tuning mode.1󳀏When using

3READ THIS BEFORE OPERATING YOUR UNITFOR U.S.A AND CANADA ...120 VUnits shipped to the U.S.A and Canada aredesigne

ENGLISH30RECORDING󳀏The analog signals from the 7.1 CH DIRECT inputs as well as the digital signals from the coaxial or opticaldigital input can be hea

ENGLISH31DIGITAL AUDIO RECORDING WITH MD RECORDERFor digital recording, select the desireddigital input as the recording signal input.2Select a desire

ENGLISH32OTHER FUNCTIONS󳀏This function compresses the dynamic range ofpreviously specified parts of the Dolby Digital soundtrack(with extremely high v

ENGLISH33Select the desired video input source toenter its label.1Press the VIDEO LABEL button to enter thevideo label mode.Example) When selecting VI

ENGLISH34ROOM 2 SOURCE PLAYBACK󳀏This function allows enjoying one source in the main room and playing another in a different room at the same time.󳀏Th

ENGLISH35Using the OSDCURRENT STATUS DISPLAYThis mode shows the status corresponding to each operation.󳀏The on-screen display will automatically disap

ENGLISH36Select the desired menu using the CURSORUP(▲)/DOWN(▼) buttons.2OFFOSDPOWERMAINPAGEFAVMUTECH/SETVOLRETURNDISCDISPMIROOM 21STEREO7.1SURRCH23456

ENGLISH󳀏You can assign the power amplifier for the surround back channels to the ROOM 2.In this case, you need not use the power amplifier to drive th

ENGLISH38󳀏After you have installed this unit and connected all the components, you first perform the speaker setup settings forthe optimum sound acous

ENGLISH39Repeat the above steps ② and ③ until the speakers are all set to the desired mode.4Repeat the above steps ④ and ⑤ until the distances are all

4CONTENTSIntroduction󳀏UNPACKING AND INSTALLATION ...

ENGLISH40Repeat the above steps ② and ③ until each level is adjusted as desired.4󳀏Each time these buttons are pressed, “▶” is moved to thecorrespondin

ENGLISH41󳀏Each time these buttons are pressed, “◀” and “▶” aremoved to the corresponding DIGITAL IN.󳂮When selecting the DIGITAL IN SETUP󳀏You can match

ENGLISH42Press the CURSOR LEFT(◀)/RIGHT(▶) buttons to select the desired DIGITAL IN.4󳀏Each time these buttons are pressed, the DIGITAL INs change.󳂮Not

43TONE DEFEAT :OffTONE CONTROLRETURN:Back , :Select BASS-----+-----0 dBTREBLE-----+-----0 dBOFFOSDPOWERMAINPAGEFAVMUTECH/SETVOLRETURNDISC

ENGLISH44󳀏Each time these buttons are pressed, the OSD modechanges as follows:On : To turn on the current status display. ↕Off : To turn off the curr

45DC TRIGGER :TUNER VIDEO1CD VIDEO2AUX VIDEO3TAPE MON. VIDEO4PHONO VIDEO5OffDC TRIGGERENTER:Set , , , :Move OFFOSDPOWERMAINPAGEFAVMUTECH

ENGLISH46󳀏Each time these buttons are pressed, the digital re-mastering mode changes as follows:On : Select this to process the input signal digitally

ENGLISH47󳀏Each time these buttons are pressed, “◀” and “▶” aremoved to the corresponding mode.󳀏Each time these buttons are pressed, the modes change a

ENGLISH48󳀏Depending on the input digital signal format, you can select the desired decoding mode.Auto : Select this for automatic detection of a digit

ENGLISH49󳀏Each time these buttons are pressed, the channel level canbe adjusted within the range of -15~+15 dB.󳀏Each time these buttons are pressed, “

5System Connections󳀏Please be certain that the receiver is unplugged from the AC outlet before making any connections.󳀏Be sure to connect the white RC

ENGLISH50󳀏The ROOM 2 function allows enjoying one source in the main room while playing another in a different room atthe same time.󳀏The analog signal

51󳀏Each time these buttons are pressed, the ROOM 2FEED mode is changed to “On” or “Off”.󳀏When the ROOM 2 FEED mode is set to “Off”, theROOM 2 source c

52Troubleshooting GuidePROBLEM POSSIBLE CAUSE REMEDYNo powerNo soundNo sound from the surroundspeakersNo sound from the (front) centerspeakerNo sound

53󳂮 AMPLIFIER SECTION󳀏Power output, stereo mode, 8 Ω, THD 0.05%, 20 Hz~20 kHz...

5707-21052-001-0OPERATINGINSTRUCTIONSR-963AUDIO/VIDEO SURROUND RECEIVER

6 CONNECTING VIDEO COMPONENTSPOWEROPEN/CLOSEPHONES LEVELPHONESMIN MAXON/OFFMULTIPLE COMPACT DISC PLAYER CDC-5080R1 2 3 4 5GRAPHICS PEAK DELETE EDITSC

7CENTERSPEAKERFRONT B SPEAKERS• The COAXIAL or the OPTICAL DIGITAL OUTs of the components that are connected to CD, TAPE MONITOR and VIDEO 1-VIDEO 5 o

ENGLISH8CENTERSPEAKERFRONT B SPEAKERS ROOM 2 connections• To control this unit from a remote location, connect this jack to the output of the multi-r

9ENGLISHCENTERSPEAKERFRONT B SPEAKERS• These outlets are switched on(power-on mode) and off(standby mode) according to the power control as follows(M